• [CAMERA CAR CRANE] Achieve Complex Vehicle Mounted Cinematography
• [UNIVERSAL] Mounting Hardware Accommodates Most Vehicles
• [COMPATIBLE] with the DJI RS2, RS3 Pro, Ronin 4D, Movi Pro, Ronin MX and More
• [COUNTERWEIGHT-LESS] Design Requires No Additional Weights and Supports 360 Degree Rotation
• [PORTABLE DESIGN] Makes the System Easy to Transport via an SUV or Commercial Airline

Hydra-Arm Mini is the ultimate cinema camera car crane. Complex vehicle mounted cinematography is now more within reach for filmmakers than ever before.

The system is portable, lightweight, and relatively easy to use for filming vehicles from multiple angles while in movement.

Designed specifically for the RS 3 PRO and RS 2, but compatible with a range of gimbals and camera systems such as the Ronin 4D, Ronin MX, Freefly Movi Pro.

The lightweight, counterweight-free design makes the system faster to set up and safer to operate as users will only need to focus on one end of the arm at any given time.

The Pro Kit includes suction cups, speed rail and ratchet straps allow you to mount the system easily to most vehicles that can support the 176lb weight of the arm not including a gimbal or camera.

The Basic Kit will be available in the near future without mounting hardware for users who already own 50mm Speed Rail or who are looking to build their own permanent mount.

There are optional suction cup kits for vehicles with various sized sunroofs including panoramic sunroofs and an optional Electronic Kit that allows users to monitor the suction cup pressure remotely for added safety.

The Shock Absorbing Arm helps stabilize the gimbal when operating on uneven surfaces and can be adjusted for various payloads.

The Shock Absorbing Head of the arm can be individually adjusted for both the horizontal and vertical axis.

The included Controller connects via a wired connection ensuring reliable communication to the arm.

The Controller gives the operator access to various options for the tilt and pan axis, including speed, dampening, and range of motion limitations for each axis individually.

Custom user settings allow the operator to select from a range of configurations so that they can operate in a way that is most comfortable to them.

Pro Mode is an expanded control option that allows users to control the Hydra Arm Mini and an RS2/RS3 Pro Gimbal simultaneously through the controller.

Please note this is not recommended for most shooting situations and is only advised with proper precautions.

The system can support speeds of up to 74 mph (120 km/h) in ideal conditions, but we recommend keeping speeds at or below 37 mph (60km/h) especially when using heavier cameras or lighter gimbals.

The primary factors that will impact operating speeds are camera weight, gimbal strength, and weather conditions.

Other gimbals can be used as well as long as they can be mounted via 1/4″-20 threads, powered via V-Mount batteries and stay within the 22lb weight limit.

The system includes a V-Mount Battery Plate mounted on the end of the arm which allows users to power their gimbal via the included P-Tap to 2 Pin Power Cable or with a different cable if needed.

*An optional Gold Mount Battery Plate will be available as an additional purchase in the near future.*

The arm itself does not have any power or video passthrough features meaning you will need to utilize a wireless video transmitter (not included) and power your camera via onboard batteries or the Gold/V-Mount battery plate found on the arm.

To power the system, you will need a 220V 1800wH+ power source which is NOT INCLUDED.

We recommend the EcoFlow Delta and a 110 to 220V Power Converter (3000W+) if needed.

RETURN POLICY: This system  can be returned within 30 days, but will be subject to a 30% RESTOCKING FEE unless the system arrives defective.

Return shipping for non-defective units will not receive return labels. 

Pro Kit:

1：Pan Axis Module *1
2：50mm Speed Rail*2
3：Suction Cup Support Bracket*4
4：Monitor Support Bracket for The Front Passenger Seat*1
5：Suction Cup*2
6：Articulating Arm*2
7：Monitor Support Bracket for The Rear Passenger Seat*2
8：Tilt Axis Module*1
9：Cable Support Rod*2
10：Crane Arm Piece I*2
11：Crane Arm Piece II*1
12：Shock Absorbing Arm*1
13：Remote Control*1
14：Battery Plate for Hydra Arm Mini -V Mount*1
15：Power Supply Base Plate for DJI Ronin*1
16：220V Power Cable*1
17：Communication Cable*1
18：Support Cable*2
19：2-Pin to P-tap Power Cable*1
20：Ratchet Strap*2
21：Tool Set*1
22: Cable Support Bar*4

臂長為 152 英寸/ 387 厘米，較大高度為 177 英寸/ 450 厘米

較大有效載荷為 22.05 磅/10 千克（包括云臺）

高/低角度速度：每1.7秒80°/移動角度速度：每6秒360°

凈重：154磅/ 70公斤（近似重量，不包括云臺或相機）

包裝尺寸：39.37 英寸 x 19.69 英寸 x 15.75 英寸（100 厘米 x 50 厘米 x 40 厘米 |以三種包裝發貨）

電源要求：220V 1800wH+

（電源轉換器：110V 至 220V 3000W+）

Arm length is 152in / 387cm, max height is 177in / 450cm

Maximum payload is 22.05lbs / 10kg (including gimbal)

Speed of high/low angle: 80° per 1.7 sec. / Speed of moving angle: 360° per 6 sec.

Net weight: 154lbs / 70kg (approximate weight, not including gimbal or camera)

Packing Dimensions: 39.37in x 19.69in x 15.75in (100cm x 50cm x 40cm | Ships in Three Packages)

Power Requirement: 220V 1800wH+

(Power Converter: 110v to 220V 3000W+)

該系統便攜、輕便，并且相對易于使用，用于在運動中從多個角度拍攝車輛。

專為RS 3 PRO和RS 2設計，但與一系列云臺和相機系統兼容，如Ronin 4D，Ronin MX，Freefly Movi Pro。

輕巧、無配重的設計使系統設置更快，操作更安全，因為用戶在任何給定時間只需要專注于手臂的一端。

Pro 套件包括吸盤、速軌和棘輪帶，可讓您輕松地將系統安裝到大多數可以支撐手臂 176 磅重量（不包括萬向節或相機）的車輛上。

基本套件將在不久的將來提供，無需安裝硬件，適用于已經擁有50 毫米高速鐵路或希望構建自己的永久支架的用戶。

有可選的吸盤套件，適用于具有各種尺寸天窗的車輛，包括全景天窗和可選的電子套件，允許用戶遠程監控吸盤壓力以增加安全性。

減震臂有助于在不平坦的表面上操作時穩定云臺，并可根據各種有效載荷進行調整。

手臂的減震頭可以針對水平軸和垂直軸單獨調節。

隨附的控制器通過有線連接連接，確保與手臂的可靠通信。

控制器使操作員可以訪問傾斜和平移軸的各種選項，包括每個軸的速度、阻尼和運動范圍限制。

自定義用戶設置允許操作員從一系列配置中進行選擇，以便他們能夠以較舒適的方式操作。

專業模式是一個擴展的控制選項，允許用戶通過控制器同時控制Hydra Arm Mini和RS2 / RS3 Pro Gimbal。

請注意，對于大多數拍攝情況，不建議這樣做，僅建議采取適當的預防措施。

在理想條件下，該系統可以支持高達 74 英里/小時（120 公里/小時）的速度，但我們建議將速度保持在 37 英里/小時（60 公里/小時）或以下，尤其是在使用較重的相機或較輕的云臺時。

影響運行速度的主要因素是相機重量、云臺強度和天氣條件。

其他萬向節也可以使用，只要它們可以通過 1/4“-20 螺紋安裝，通過 V 型安裝電池供電并保持在 22 磅的重量限制內。

該系統包括一個安裝在臂末端的 V 型安裝電池板，允許用戶通過隨附的 P-Tap 轉 2 針電源線或在需要時使用其他電纜為其云臺供電。

*可選的金卡口電池板將在不久的將來作為額外購買提供。

支架本身沒有任何電源或視頻直通功能，這意味著您需要使用無線視頻發射器（未隨附）并通過板載電池或手臂上的金/V 卡口電池板為相機供電。

要為系統供電，您需要一個不包括在內的 220V 1800wH+ 電源。

如果需要，我們建議使用EcoFlow Delta和110至220V電源轉換器（3000W +）。

退貨政策：此系統可以在 30 天內退貨，但除非系統到達有缺陷，否則將收取 30% 的重新入庫費。

無缺陷商品的退貨運輸將不會收到退貨標簽。